|
we just installed the tz 210 on our network. i am having trouble using remote desktop (via sonicwall global vpn client) to connect to our workstations on our lan (ip 192.168.16.0 mask 255.255.255.0) also, cannot ping any pc on the network 192.168.16.0
i can log into to the server through the sonicwall vpn tunnel using remote desktop with ip 192.168.168.2 (see below server nic #1) but cannot ping or remote desktop to any of the lan nic #2 on different subnet 192.168.16.0 mask 255.255.255.0)
the sonicwall is the dhcp server for the vpn using the sonicwall global vpn client. talked to sonicwall tech support and they say everything is properly configured on the sonicwall.
do i need to set up a static route on the server ip routing table? how do i do this?
please and thanks for all your help,
our network is set-up as follows –
internet wan ip - xx.xx.xx.xx
_____________________________
sonicwall firewall ip – 192.168.168.168
_________________________ server "name" domain controller / dhcp
– 192.168.168.2 – wan nic #1
ip address: 192.168.168.2 subnet mask: 255.255.255.0 default gateway: 192.168.168.168 dns servers: 192.168.16.1
– 192.168.16.1 – lan nic #2
ip address: 192.168.16.1 subnet mask: 255.255.255.0 default gateway: dns servers: 192.168.16.1
switch – server and all lan pcs plugged into switch – server does the routing, dns and dhcp.
here is the ip routing table from the server
destination,network mask,gateway,interface,metric,protocol
(责任编辑：admin) |
